•
Z-20 Shield Replacement:

NOTE: DO NOT USE power tools or overtighten screws when changing shields.
Step 1 - Lay a towel on a flat surface and set the helmet on it.
Step 2 - Remove the shield pivot tensioners on each side. (This is the smaller screw on the sides of the shield.)
Step 3 - Remove the shield pivot screws on each side. (This is the larger screw on the sides of the shield. For best results, we suggest using a quarter to loosen/tighten these screws.)
Step 4 - Remove the shield. We suggest using a soft cloth towel to wipe down the rubber seal as well as where the shield mounts to the helmet for best results.
Step 5 - Place the new shield on the helmet. There are two white washers that go between the shield and helmet, make sure these are in place before re-installing the shield pivot screws.
Step 6 - Hand thread the shield pivot screws to hold the shield in place. Once hand threaded, use a quarter to tighten until snug with the helmet shell. Do not overtighten.
Step 7 - Hand thread the shield pivot tensioners, then tighten to desired tension for shield movement.

ZAMP

ZAMP Z-20 ANTIFOG VISOR SERIES

SKU HASZ20CLAF
$100.76
Z-20 Shield Replacement:

NOTE: DO NOT USE power tools or overtighten screws when changing shields.
Step 1 - Lay a towel on a flat surface and set the helmet on it.
Step 2 - Remove the shield pivot tensioners on each side. (This is the smaller screw on the sides of the shield.)
Step 3 - Remove the shield pivot screws on each side. (This is the larger screw on the sides of the shield. For best results, we suggest using a quarter to loosen/tighten these screws.)
Step 4 - Remove the shield. We suggest using a soft cloth towel to wipe down the rubber seal as well as where the shield mounts to the helmet for best results.
Step 5 - Place the new shield on the helmet. There are two white washers that go between the shield and helmet, make sure these are in place before re-installing the shield pivot screws.
Step 6 - Hand thread the shield pivot screws to hold the shield in place. Once hand threaded, use a quarter to tighten until snug with the helmet shell. Do not overtighten.
Step 7 - Hand thread the shield pivot tensioners, then tighten to desired tension for shield movement.
$100.76
Color:

Product Ordering

If our product is out of stock it may be an item we don't stock on a regular basis but can been ordered on request or is currently on the way from one of our suppliers. If you would like to enquire about this product please contact us and be sure to use the product SKU when enquiring. 

Delivery

Delivery timeframes are an estimate of what our supplier has communicated to us. Deliveries can be delayed beyond our control but each package has tracking information for you to follow items up if need be. Edge Parts and Performance cannot be held responsible for delayed timeframes.

Returns

Returns and Refund Policy

Please retain your invoice as proof of purchase for warranty purposes.
The warranty does not extend to consequential damage or loss arising from the use of the goods supplied.
Electronic parts and units are non refundable.
Please contact our sales staff if you are unsure about a purchase as there are no returns for incorrectly purchased goods.
No faulty goods can be accepted for credit/replacement unless returned within 14 days of pick up or delivery of goods, accompanied by the original invoice and goods must be in original condition.
Goods returned will be at the expense of the customer unless faulty.

Pricing

These prices listed are available online only as pricing may vary in-store.